Description
IBPSI are used to supply energy to the first power supply consumers class with a single power supply, as well as for the reception and distribution of electric energy, local, remote and automatic control of different processes, such as control of supply and exhaust ventilation systems, pumps with asynchronous motors in heat water supply points, production lines, etc., working in three-phase AC with voltage ~ 380/220 V, 50 Hz frequency.
Components
– backup power station(diesel, petrol or gas);
– uninterruptible Power Supply (UPS);
– incoming voltage stabilizer;
– actuating unit (ATS).
Certificate
Complies with the requirements TU 3414-001-61938140-2015
Functions
Uninterruptible Power Supply (UPS) is a device that allows the connected equipment to operate after the failure of centralized power supply and till turning on, for example, of the backup diesel motor. It is necessary in case of maintaining a constant power supply for the most essential consumers, such as computer systems, security systems, emergency lighting, etc. However, if the equipment can take a break in the power supply for 3-5 minutes, then you can do without the UPS.
Input voltage stabilizer is used to protect appliances from power surges and electrical line noise..
The control unit (ATS) connects all the components of the backup power system and synchronizes their work.
Application area
Health care facilities, office buildings, industrial facilities, utilities and others.
Technical specifications *
|
Name of regulated indicators |
The value of indicators |
||
|
Power transformer |
|||
|
Power, kV·А |
From 25 to 160 (In accordance with WL) |
||
|
Rated voltage, kV |
on HV side |
in accordance with WL |
|
|
on LV side |
0,38 |
||
|
Efficiency, % minimum |
95 |
||
|
Insulation type |
Dry |
||
|
No-load current at voltage, A, maximum |
6 kV |
0,4 |
|
|
10 кВ |
0,6 |
||
|
Uninterruptable power supply |
|||
|
UPS rated power, kV·А |
According to WL |
||
|
Rated output voltage, kV |
0,38 |
||
|
Output voltage frequency, Hz |
50 |
||
|
UPS power factor, minimum |
0,9 |
||
|
Type of output voltage |
alternating |
||
|
Permissible output voltage distortion with linear load, % |
3 |
||
|
Permissible output voltage distortion with non linear load, % |
5 |
||
|
UPS efficiency in the nominal mode,%, minimum |
95 |
||
|
Allowable current overload, %, minimum |
within 10 min |
125 |
|
|
within 1 min |
150 |
||
|
Type UPS output connection |
3L+N+PE |
||
|
Load Cross ration |
3:1 |
||
|
Climatic version according to GOST 15150 |
УХЛ 4 |
||
|
UPS restarting interval after shutdown, with, maximum |
60 |
||
|
Accumulator battery |
|||
|
Type of battery |
Lead-acid, sealed |
||
|
Rated capacity A • h |
According to WL |
||
|
The allowable number of charge-discharge cycles for the battery at a discharge depth of 40%, minimum |
800 |
||
|
battery local action at ambient temperature up to 20 °C,%, maximum |
0,1 |
||
|
Power station |
|||
|
Power, kW |
According to WL |
||
|
Permissible power overload within 1 hour,%, minimum |
10 |
||
|
Mode of operation according to GOST R 53987 |
Tied to time operation mode at constant load |
||
|
Running time, h, minimum |
250 |
||
|
required output voltage, V |
380 |
||
|
rated output frequency, Hz |
50 |
||
|
Rated power factor, minimum |
0,8 |
||
|
The degree of automation according to GOST R 53987 |
3 |
||
|
Time from receipt of a signal by the automatic start till the moment ready-to-receive |
180 |
||
|
ES output, neutral mode |
Five-wire, solidly earthed neutral,, With division of PEN busbars on |
||
|
Fuel |
Diesel or petrol |
||
* Technical specifications and completing units can be changed in accordance with the technical requirements of the customer.
This information is introductory and can be changed without notice.
Type designation is КУРЭ.
